Your cart is currently empty!
Out of Stock
Additional Stock: 1 to 3 days
The PF-19-M-C is normally stocked but we are currently out. You can still order this part and we will ship it as soon as it is available.
PRICE : $66.95
Now anyone can build virtually perfect frog and switch points for 19° crossings simply and easily – Guaranteed!
With the Fast Tracks, PointForm filing jig modelers of all skill levels can construct realistic-looking, better-performing frog or switch points that can reduce derailments and simplify this otherwise difficult step in building a crossing.
The PointForm works by holding the rail at a precise angle so that points can be filed. Its use is simple, slide the rail into the grooves in the tool, tighten the cap screws using the supplied 5/32″ Allan wrench and file the rail flush with the tool’s edge, and you are done!
Crossing PointForm tools produce both the Obtuse and Acute frog angles needed to build a crossing.
Get perfect results every time!
Frog points formed with the PointForm tool will produce two symmetrical halves of the frog, making placement of the points into a Fast Tracks assembly fixture very easy; slide the two rails forward in the grooves until they meet.
Points constructed with the PointForm tool are ideally suited for constructing points for Fast Tracks made trackwork but can also be used for hand-laid trackwork built without a Fast Tracks assembly fixture.
This PointForm filing tool can be used to construct frog points for 19° crossings using Code 70, 83 & 100 rail and will work with all scales and gauges up to O. Each PointForm filing jig comes complete with a 5/32″ Allen wrench for tightening the clamping screws and will last for thousands of uses.
|Switch Size||19°||This turnout size that the PointForm will work with.|
|Works with Rail Codes||70, 83 & 100|
|Switchpoint Angle||2°||The angle between the straight and diverging route at the switchpoint.
|Diverging Route Angle||19° (Decimal)|
|Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
|Size||L - 4" (102 mm)|
W - 1.1" (28 mm)
H - 1" (25 mm)
|The physical size of the product|
|Weight||1.056 lbs (0.479 kg)|
|Material||Blackened Cold Rolled Steel|
Building Turnouts Using Fast Tracks Assembly Fixtures
This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.
Building A Turnout Switch Using Fast Tracks Tools
Step-by-step videos demonstrate how to build a complete switch using a Fast Tracks assembly fixture, PointForm, StockAid, and other tools.
Using The Fast Tracks PointForm Tool To Build Switchpoints
The PointForm tool is not only used to file Frog points. It can also be used to file perfect switch points as well. Here is how it works.
Using The Fast Tracks PointForm Tool To Build Frogpoints
Building highly accurate frogpoints is made fast and simple with the Fast Tracks PointForm tool. Here is a detailed demonstration showing you how it works.
Using The StockAid Tool To File The Base Of The Stockrail
Video demonstration on using the StockAid tool to remove the base of the stockrail.
Fast Tracks Video Channel
Visit our growing collection of track building demonstration videos
Fast Tracks Knowledge Base
In addition to an extensive Q&A section, we also offer a full library of track building documents.
Items you may want to include in your order
46 in stock
5 in stock
4 in stock
4 in stock
1 in stock