As of July 1, 2024, the 1-888 phone service in no longer available. Use the Contact Us Button above for support.
Browse Catalog
As of July 1, 2024, the 1-888 phone service in no longer available. Use the Contact Us Button above for support.

QuickSticks Laser Cut Ties For Z, #8 Turnouts

LT-Z-T-8
Slide

Built When Ordered

Production Time: 2 to 3 days

The LT-Z-T-8 will be automatically added to our production queue when it is ordered.

PRICE : $6.59

Each QuickStick can be used for a Left or Right-hand turnout. The price shown is for one QuickStick.

Specially designed for trackwork built with Fast Tracks assembly fixtures, QuickSticks laser cut ties let you construct fully complete, ready-to-run Z turnouts right at your workbench!

Using our track assembly fixtures, you build what we call a "skeleton." This skeleton will have PC Board ties located at key locations to keep the piece of trackwork in gauge. To finish the trackwork, our Laser Cut QuickSticks are used. With a single step, all the remaining wood ties are added to the pre-built skeleton, and the trackwork is ready to be installed.

Now anyone can build inexpensive, hand laid trackwork that:

  • Looks Great! - With realistic-looking trackwork on wood ties
  • Is Easy To Build - With results that rival even the most experienced modelers
  • Performs Perfectly - Build hundreds of turnouts with one fixture
  • Can Be Built Quickly - Build a fully complete turnout in less than an hour!
  • Looks Great! - Get results that rival even the most experienced modelers
  • Lets You Work in Comfort - Build trackwork at your workbench

QuickSticks are cut from Baltic Birch plywood custom sawn in Finland specifically for Fast Tracks. Like the prototype, the wood grain on our QuickSticks ties runs perpendicular to the rails. The ties are 0.03" (0.8mm), 7 scale inches thick and 0.04" (1mm) 9 scale inches wide. They will match all popular commercially available wood ties, including wood ties available from Fast Tracks. The ties will also match all popular commercial track, and trackwork completed with QuickSticks will be compatible with these products.

Gluing QuickSticks in place

Gluing QuickSticks to trackwork.

QuickSticks laser cut ties are designed to be glued to the rails using using Pliobond glue. This type of adhesive will provide a very reliable bond that will increase in strength over time.

Reviews

There are no reviews yet.

Be the first to review “QuickSticks Laser Cut Ties For Z, #8 Turnouts”
PARAMETERVALUEDETAILS
Default Turnout Length5.9" (150 mm)This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length4.8" (122 mm)This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle7.13 (Decimal)
7°/7'/48"(D/M/S)
1:8 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
Diverging Route Radius27" (686 mm)The minimum radius in a straight turnout.
Tie Spacing (Prototype)20" (508 mm)Tie spacing center of tie to center of tie.
Tie Size (Model)L - 0.46" (12 mm)
W - 0.04" (1 mm)
H - 0.03" (1 mm)
The actual size of the tie.
Tie Size (Prototype)L - 8.5' (2.6 m)
W - 9"(229 mm)
H - 7" (178 mm)
The original tie size that the model was based on.
Track Gauge0.26" (7 mm)The distance between the stock rails.
SizeL - 6.38" (162 mm)
W - 1.5" (38 mm)
H - 0.03" (1 mm)
The physical size of the product
Weight0.02 lbs (0.009 kg)
Material3 Ply Baltic Birch
Building Turnouts Using Fast Tracks Assembly Fixtures

This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.

Completing Switches Using Fast Tracks QuickSticks

This Builders Guide details how to complete building your switch using QuickSticks laser-cut wood ties.

Finishing Straight/Curved Track With QuickSticks

Watch as we demonstrate how to use our QuickSticks laser cut ties to finish straight and curved trackwork built in a Fast Tracks fixture.

Fast Tracks Video Channel

Visit our growing collection of track building demonstration videos

Fast Tracks Knowledge Base

In addition to an extensive Q&A section, we also offer a full library of track building documents.

Items you may want to include in your order​

286 in stock

$7.45

38 in stock

$9.49

PREVIOUSLY VIEWED PRODUCTS