Due to a labour interruption effecting Canada Post, Postal shipping options are temporarily unavailable. UPS options are still avilable.
Browse Catalog
Due to a labour interruption effecting Canada Post, Postal shipping options are temporarily unavailable. UPS options are still avilable.

S-SN3 Dual Gauge, Right-Hand QuickSticks, NG on Right - Drilled

LT-S-SN3-T-6-D-RR
Slide

Made When Ordered

Production Time: 2 to 3 days

The LT-S-SN3-T-6-D-RR will be automatically added to our production queue when it is ordered.

PRICE : $27.30

S-Sn3 dual gauge, right-hand turnout with the narrow gauge on the right side have been specially designed for trackwork built with Fast Tracks dual gauge assembly fixtures. QuickSticks laser cut ties let you construct complete, ready-to-run dual gauge turnouts right at your workbench!

Using our track assembly fixtures, you build what we call a "skeleton." This skeleton will have PC Board ties located at key locations to keep the piece of trackwork in gauge. To finish the trackwork, our Laser Cut QuickSticks are used. With a single step, all the remaining wood ties are added to the pre-built skeleton, and the trackwork is ready to be installed.

Now anyone can build inexpensive, hand-laid trackwork that:

  • Looks Great! - With realistic-looking trackwork on wood ties
  • Is Easy To Build - With results that rival even the most experienced modelers
  • Performs Perfectly - Eliminates derailments
  • Looks Great! - Get results that rival even the most experienced modelers
  • Lets You Work in Comfort - Build trackwork at your workbench

QuickSticks are cut from Baltic Birch plywood custom sawn in Finland specifically for Fast Tracks. The wood grain runs perpendicular to the rails. The ties are 7" thick and 9" wide (scale). They will match all popular commercially available wood ties, including wood ties available from Fast Tracks.

The QuickSticks on this page are the Drilled version. We offer Quicksticks with either drilled or non-drilled wood ties. The version you choose is a matter of personal preference. The non-drilled version has trackwork fastened to it with Pliobond adhesive. Plionbond will provide a solid bond for a lifetime as its bond increases over time and is very reliable. Spiking onto our drilled QuickSticks will provide a mechanical bond that some modelers prefer, but requires a bit more time to install. Not all ties are pre-drilled, only ties at key locations to allow the turnout to be fastened in place.

Spiking to QuickSticks

Spiking trackwork to QuickSticks.

If you prefer, a non-drilled version is available that is designed to be glued to the rails using Pliobond glue.

Reviews

There are no reviews yet.

Be the first to review “S-SN3 Dual Gauge, Right-Hand QuickSticks, NG on Right - Drilled”
PARAMETERVALUEDETAILS
Default Turnout Length15.7" (399 mm)This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length10.8" (274 mm)This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle9.46 (Decimal)
9°/27'/36"(D/M/S)
1:6 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
Diverging Route Radius59" (1499 mm)The minimum radius in a straight turnout.
Tie Spacing (Prototype)20" (508 mm)Tie spacing center of tie to center of tie.
Tie Size (Model)L - 1.59" (40 mm)
W - 0.14" (4 mm)
H - 0.1" (3 mm)
The actual size of the tie.
Tie Size (Prototype)L - 8.5' (2.6 m)
W - 9"(229 mm)
H - 7" (178 mm)
The original tie size that the model was based on.
Track Gauge0.89" (23 mm)The distance between the stock rails.
SizeL - 16" (406 mm)
W - 3.5" (89 mm)
H - 0.1" (3 mm)
The physical size of the product
Weight0.12 lbs (0.054 kg)
Material3 Ply Baltic Birch
Building Turnouts Using Fast Tracks Assembly Fixtures

This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.

Completing Switches Using Fast Tracks QuickSticks

This Builders Guide details how to complete building your switch using QuickSticks laser-cut wood ties.

Finishing Straight/Curved Track With QuickSticks

Watch as we demonstrate how to use our QuickSticks laser cut ties to finish straight and curved trackwork built in a Fast Tracks fixture.

Fast Tracks Video Channel

Visit our growing collection of track building demonstration videos

Fast Tracks Knowledge Base

In addition to an extensive Q&A section, we also offer a full library of track building documents.

Items you may want to include in your order​

222 in stock

$7.45

13 in stock

$12.50

3 in stock

$4.99

PREVIOUSLY VIEWED PRODUCTS