The Fast Tracks site was moved to a new hosting service on June 15, 2023. For security reasons you will need to reset your account password.

N-NN3 Dual Gauge, Right-Hand QuickSticks, NG on Right


Built When Ordered

Production Time: 2 to 3 days

The LT-N-NN3-T-6-RR will be automatically added to our production queue when it is ordered.

PRICE : $11.09

N–Nn3 dual gauge, right-hand turnout with the narrow gauge on the right side have been specially designed for trackwork built with Fast Tracks dual gauge assembly fixtures. QuickSticks laser cut ties let you construct complete, ready-to-run dual gauge turnouts right at your workbench!

Using our track assembly fixtures, you build what we call a “skeleton.” This skeleton will have PC Board ties located at key locations to keep the piece of trackwork in gauge. To finish the trackwork, our Laser Cut QuickSticks are used. With a single step, all the remaining wood ties are added to the pre-built skeleton, and the trackwork is ready to be installed.

Now anyone can build inexpensive, hand-laid trackwork that:

  • Looks Great! – With realistic-looking trackwork on wood ties
  • Is Easy To Build – With results that rival even the most experienced modelers
  • Performs Perfectly – Eliminates derailments
  • Looks Great! – Get results that rival even the most experienced modelers
  • Lets You Work in Comfort – Build trackwork at your workbench

QuickSticks are cut from Baltic Birch plywood custom sawn in Finland specifically for Fast Tracks. The wood grain runs perpendicular to the rails. The ties are 7” thick and 9” wide (scale). They will match all popular commercially available wood ties, including wood ties available from Fast Tracks.

Gluing QuickSticks in place

Gluing QuickSticks to trackwork.

QuickSticks laser cut ties are designed to be glued to the rails using using Pliobond glue. This type of adhesive will provide a very reliable bond that will increase in strength over time.


There are no reviews yet.

Be the first to review “N-NN3 Dual Gauge, Right-Hand QuickSticks, NG on Right”
Default Turnout Length6.3" (160 mm)This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length4.3" (109 mm)This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle9.46 (Decimal)
1:6 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
Diverging Route Radius23" (584 mm)The minimum radius in a straight turnout.
Tie Spacing (Prototype)20" (508 mm)Tie spacing center of tie to center of tie.
Tie Size (Model)L - 0.64" (16 mm)
W - 0.06" (2 mm)
H - 0.04" (1 mm)
The actual size of the tie.
Tie Size (Prototype)L - 8.5' (2.6 m)
W - 9"(229 mm)
H - 7" (178 mm)
The original tie size that the model was based on.
Track Gauge0.36" (9 mm)The distance between the stock rails.
SizeL - 7" (178 mm)
W - 3.5" (89 mm)
H - 0.04" (1 mm)
The physical size of the product
Weight0.05 lbs (0.023 kg)
Material3 Ply Baltic Birch
Building Turnouts Using Fast Tracks Assembly Fixtures

This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.

Completing Switches Using Fast Tracks QuickSticks

This Builders Guide details how to complete building your switch using QuickSticks laser-cut wood ties.

Finishing Straight/Curved Track With QuickSticks

Watch as we demonstrate how to use our QuickSticks laser cut ties to finish straight and curved trackwork built in a Fast Tracks fixture.

Fast Tracks Video Channel

Visit our growing collection of track building demonstration videos

Fast Tracks Knowledge Base

In addition to an extensive Q&A section, we also offer a full library of track building documents.

Items you may want to include in your order​

227 in stock


187 in stock