Due to a labour interruption effecting Canada Post, Postal shipping options are temporarily unavailable. UPS options are still avilable.
Browse Catalog
Due to a labour interruption effecting Canada Post, Postal shipping options are temporarily unavailable. UPS options are still avilable.

Frog Helper for #8, #10 & #12 and ME Code 55 Rail

FH-ME55-X
Slide
Slide

Out of Stock

Additional Stock: 1 to 3 days

The FH-ME55-X is normally stocked but we are currently out. You can still order this part and we will ship it as soon as it is available.

PRICE : $56.95

This Fast Tracks Frog Helper soldering jig makes easy work of building precision frog points for #8, #10 & #12 switches with ME Code 55 rail. This simple jig works by holding the prepared rail at a precise angle so that the frog points can be pre-soldered. Its use is simple, slide the prepared rails into the jig, solder the points together, and you are done!

The Fast Tracks Frog Helper:

  • Is fast - Construct a set of frog points in minutes
  • Is easy to use - Rails are held in perfect alignment, making it easy to pre-solder the frog
  • Produces consistent, reliable results - Creates smooth operating turnouts every time!
  • Can be used to create curved frog points - Rail is pre-bent before using the jig
  • Can accommodate up to 3 different turnout sizes - This tool can be used to build frog points for #8, #10 & #12 switches

Frog points constructed with the Frog Helper are ideally suited for creating turnouts using Fast Tracks Twist Ties, but can also be used for any hand-laid trackwork. To make point building even easier, we highly recommend that you consider purchasing a matching PointForm tool. The PointForm tool will help you file precisely fitting frog and switch points quickly and easily and is an ideal companion to the Frog Helper tool. This tool has been designed to be used with our TwistTies products. It is not required if you purchase an assembly fixture. (The fixture itself can be used for this purpose.)

1 review for Frog Helper for #8, #10 & #12 and ME Code 55 Rail

  1. 5 out of 5

    Stephen Sharp (verified owner)

    Much easier than using the switch jig. You could make several all at once for future switches. Easier to solder too.

Add a review
PARAMETERVALUEDETAILS
Rail TypeMicro Engineering Code 55
#8 Diverging Route Angle7.13 (Decimal)
7°/7'/48"(D/M/S)
1:8 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
#10 Diverging Route Angle5.71 (Decimal)
5°/42'/36"(D/M/S)
1:10 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
#12 Diverging Route Angle4.76 (Decimal)
4°/45'/36"(D/M/S)
1:12 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
SizeL - 5" (127 mm)
W - 3" (76 mm)
H - 0.25" (6 mm)
The physical size of the product
Weight0.327 lbs (0.148 kg)
Material6061 Aluminum
Using The PointForm Tool To Build Frog & Switch Points

We offer a number of different types of PointForm tools. This document provides general instructions on how to use a PointForm tool. These instructions apply to all PointForm tools.

Using the Frog Helper To Build Curved or Straight Turnout Frog Points

The Frog Helper tool works in the same manner as a full-sized assembly fixture but is specifically designed for building frog points. These instructions explain how to use the tool to construct curved or straight points and apply to all scales.

Using The Fast Tracks Frog Helper To Build Curved Frog Points

The Fast Tracks Frog Helper tool can be used to build precision frogpoints for both straight and curved switches. Here we demonstrate how to build frogpoints for a curved turnout.

Using The Fast Tracks Frog Helper To Build Straight Frog Points

Building precision switch frog points is greatly simplified by using the Fast tracks Frog Helper tool along with the PointForm filing tool. This video demonstrates how.

Using The 35W Weller Soldering Iron For Model Railroad Trackwork

Using the right soldering iron to solder trackwork is critical to success. We recommend the 35 watt Weller pencil type soldering iron with the ST7 conical shaped soldering tip. Watch along as we demonstrate how to get the most from this soldering equipment.

Solder Overview

Detail about the solder supplied by Fast Tracks for building all types of model trackwork.

Using The Fast Tracks PointForm Tool To Build Frogpoints

Building highly accurate frogpoints is made fast and simple with the Fast Tracks PointForm tool. Here is a detailed demonstration showing you how it works.

Fast Tracks Video Channel

Visit our growing collection of track building demonstration videos

Fast Tracks Knowledge Base

In addition to an extensive Q&A section, we also offer a full library of track building documents.

Items you may want to include in your order​

56 in stock

$5.45

1256 in stock

$2.30

2 in stock

$63.95

2 in stock

$63.95

2 in stock

$63.95

PREVIOUSLY VIEWED PRODUCTS