Your cart is currently empty!
28 In Stock
We can ship the CH-S-N immediately. If you order more than what we have available, we will hold your order and add additional units required to our production queue. The lead time for this product is shown above.
PRICE : $4.99
28 in stock
S|Sn3, 1/16" (0.062" / 1.6mm) thick CopperHead PC Board Ties are produced using Fast Track's unique routing process that allows us to offer ties with a very clean edge, precise dimensions and are always perfectly flat. The copper cladding is paper thin, allowing you to cut the copper with a small file or rotary tool to isolate the rails. Both sides of the tie are copper-cladded.
Copper cladded fiberglass PC Board ties are used at strategic points in hand-laid trackwork to hold the rails in gauge permanently. The remaining ties are filled in with wood ties.
When painted, the PC Board ties will become nearly invisible, blending in with the wood ties. While some sizes of CopperHead PC board ties are not as high as standard wood ties, this will not be an issue. Once soldered to rail, the thinner PC board ties will "float" between the wood ties, the space is hidden when the track is ballasted.
Using our printable tie templates as a guide, cut the ties to the lengths you need for your turnout. While specifically designed to fit all Fast Tracks assembly fixtures, they can also be used for any hand constructed trackwork.
To speed up cutting the PC board ties to length, check out our TieBreaker tie cutting tools!
Sold on a fret of 27 ties.
PC Board Tie Dimensions
Size | Length | Width | Height |
---|---|---|---|
Prototype Imperial | 14' | 7" | 4" |
Model Imperial | 2.63" | 0.11" | 0.06" |
Prototype Metric | 4.3m | 177.8mm | 101.6mm |
Model Metric | 66.7mm | 2.8mm | 1.6mm |
1 review for CopperHead S Scale Narrow Gauge PC Board Turnout Ties - 1/16"
You must be logged in to post a review.
Building Turnouts Using Fast Tracks Assembly Fixtures
This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.
Building A Turnout Switch Using Fast Tracks Tools
Step-by-step videos demonstrate how to build a complete switch using a Fast Tracks assembly fixture, PointForm, StockAid, and other tools.
Using The TieBreaker PC Board Tie Cutting Tool
Cutting each PC Board tie to the length you need for a turnout can be tedious and drawn-out. Here Tim demonstrates how the Fast Tracks TieBreaker tool speeds up the process, reducing the construction time for a turnout by as much as 30%!
Fast Tracks Video Channel
Visit our growing collection of track building demonstration videos
Fast Tracks Knowledge Base
In addition to an extensive Q&A section, we also offer a full library of track building documents.
Jerry Wilson (verified owner) –
very nicely machined, will do exactly what I needed it to do. thanks for making a good product