Your cart is currently empty!
41 In Stock
We can ship the CH-HOn3-X immediately. If you order more than what we have available, we will hold your order and add additional units required to our production queue. The lead time for this product is shown above.
PRICE : $4.99
41 in stock
HOn3, 1/16" (0.062" / 1.6mm) thick pre-gapped, copper cladded PC Board Crossties are designed to match the height of the wood ties used for HOn3 scale straight and curved trackwork and are pre-gapped for DC and DCC compatibility.
Fast Tracks CopperHead PC Board ties are machined to shape rather than sheared or stamped, producing a perfectly flat tie with no twisting or warping and very clean, crisp edges. The copper cladding is applied to both sides of the tie with double isolation gaps cut close to the rail on one side, making it easy to disguise the gap during final finishing.
- 1/16" (0.062" / 1.6mm) thick - matches HOn3 wood crossties
- Pre-Gapped - eliminates the need to hand file the gaps into the ties
- Double Gapped - with gaps cut close to the rail to help disguise them
- Cut to length - no further preparation required
- Machined, not stamped - perfectly flat with no twisting and clean edges
Sold on a fret of 37 ties.
Tie Dimensions
PC Board Tie Dimensions
Size | Length | Width | Height |
---|---|---|---|
Prototype Imperial | 7' | 7" | 5" |
Model Imperial | 0.96" | 0.08" | 0.06" |
Prototype Metric | 2.1m | 177.8mm | 127mm |
Model Metric | 24.5mm | 2mm | 1.5mm |
4 reviews for CopperHead HOn3 PC Board Pre-Gapped Crossties - 1/16"
You must be logged in to post a review.
Building Turnouts Using Fast Tracks Assembly Fixtures
This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.
Building A Turnout Switch Using Fast Tracks Tools
Step-by-step videos demonstrate how to build a complete switch using a Fast Tracks assembly fixture, PointForm, StockAid, and other tools.
Using The TieBreaker PC Board Tie Cutting Tool
Cutting each PC Board tie to the length you need for a turnout can be tedious and drawn-out. Here Tim demonstrates how the Fast Tracks TieBreaker tool speeds up the process, reducing the construction time for a turnout by as much as 30%!
Fast Tracks Video Channel
Visit our growing collection of track building demonstration videos
Fast Tracks Knowledge Base
In addition to an extensive Q&A section, we also offer a full library of track building documents.
Dale Buxton (verified owner) –
I've been using PC board ties for over 30 years now. But the these "Copper Head" milled versions are the best idea yet! Clean and crisp with no twisting or splinters. Prep/clean up only takes seconds!
Bob Larance (verified owner) –
Great product for setting the gauge of tracks permanently once soldered in place
Alan.Trammell (verified owner) –
Same comments as with the standard gauge ties. Excellent product and the best way to keep rail in gauge by using when using plibond to secure rail by including 1 every 20” to 30” in conjunction with wood ties
Mark Williams (verified owner) –
Very good PC board ties. Very accurately and precisely cut. Sturdy and good materials