Due to a labour interruption effecting Canada Post, Postal shipping options are temporarily unavailable. UPS options are still avilable.
Browse Catalog
Due to a labour interruption effecting Canada Post, Postal shipping options are temporarily unavailable. UPS options are still avilable.

S Scale, #6 3-Way Assembly Fixture for Micro Engineering 83 Rail

AF-S-W-6-ME83
Slide

Made When Ordered

Production Time: 5 days

The AF-S-W-6-ME83 will be automatically added to our production queue when it is ordered.

PRICE : $164.59

Three-way turnouts are great space savers, especially in rail yards where there never seems to be enough space to fit everything we need. Quite a bit of space can be saved by working in a Three-Way turnout to your design.

Don't forget to order supplies!

Our Three Way turnouts are not more difficult to construct than a standard turnout and only take a little longer to build. Fast Tracks Standard Three-Way turnouts are a "lapped" design, meaning it's made of two turnouts slightly in front of each other. Use our Three Way turnout fixture to build switches that look great and will eliminate track related derailments and frustration. Fast Tracks assembly fixtures will help you build high-quality hand laid track that:

  • Is Highly Accurate - Build 3-ways that stay in perfect gauge - permanently
  • Performs Perfectly - Eliminates track related derailments
  • Is Economical - Build hundreds of 3-ways with one fixture
  • Is Easy To Build - No special skills are needed
  • Can Be Built Quickly - Build a 3-way in less than an hour!
  • Looks Great! - Get results that rival even the most experienced modelers
  • Lets You Work in Comfort - Build trackwork at your workbench
  • Is NMRA/NASG Compliant - Will work with any NMRA/NASG compliant equipment

If you order a Fast Tracks assembly fixture, we highly recommend that you consider purchasing the matching Three Way PointForm and StockAid tool.

Click on the Supplies Tab above to add additional items needed to build 3 Way turnouts to your order. Try our Supplies Calculator to determine the consumable items you will need for your trackwork project.

Below is a cross-reference chart showing which rail other than Micro Engineering is compatible with our fixtures.

Fixture Cut ForRail SizeCompatible With
ME Code 55Code 55Atlas Code 80
ME Code 55Code 55Atlas Code 55
ME Code 55Code 55Peco Code 80
ME Code 70Code 70ME Code 83
ME Code 70Code 70Peco Code 83 (IL-115)
ME Code 70Code 70Peco 75
ME Code 70Code 70Pilz Code 83
ME Code 70Code 70Tilig 83
ME Code 83Code 83ME Code 70
ME Code 83Code 83Peco Code 83 (IL-115)
ME Code 83Code 83Peco 75
ME Code 83Code 83Pilz Code 83
ME Code 83Code 83Tilig 83
ME Code 100Code 100Walthers Code 83
ME Code 100Code 100Roco “Line” 83
ME Code 100Code 100Atlas Code 83
ME Code 100Code 100Atlas Code 100
ME Code 125Code 100C & L 125
ME Code 148Code 100Right-O-Way 148

Track Building Supplies

You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!

In addition to an assembly fixture, you also need to order additional supplies.

Enter the number of switches you want to build in the top box and then click the Calculate Quantities button to determine how many products you should order.

Enter the number of switches you want to build in the top box and then click the Calculate Quantities button to determine how many products you should order.

You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!

$0.00
Selected Options Total
$0.00
Selected Options Total
$0.00

You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!

Description
REC
Options we recommend you purchase if you don’t already have them.
Quantity
Option Price
Option Total
5086
1
1.0000
i
Recommended
$20.99/ea
$0.00/total
5087
1
1.0000
i
$20.99/ea
$0.00/total
3163
6
6.0000
i
Recommended
$1.50/ea
$0.00/total
4610
1
0.4348
i
Recommended
$4.99/ea
$0.00/total
6314
1
0.0880
i
$35.99/ea
$0.00/total
3217
0
0.0000
i
Recommended
$66.95/ea
$0.00/total
3204
0
0.0000
i
Recommended
$79.95/ea
$0.00/total
3161
0
0.0000
i
Recommended
$5.45/ea
$0.00/total
3162
0
0.0000
i
Recommended
$7.45/ea
$0.00/total
3177
0
0.0000
i
$12.50/ea
$0.00/total
4653
0
0.0000
i
$70.75/ea
$0.00/total
3184
0
0.0000
i
$111.20/ea
$0.00/total
3189
0
0.0000
i
Recommended
$0.00/ea
$0.00/total

Reviews

There are no reviews yet.

Be the first to review “S Scale, #6 3-Way Assembly Fixture for Micro Engineering 83 Rail”
PARAMETERVALUEDETAILS
Default Turnout Length18.37" (467 mm)This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length14.29" (363 mm)This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle9.46 (Decimal)
9°/27'/36"(D/M/S)
1:6 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
Diverging Route Radius59" (1499 mm)The minimum radius in a straight turnout.
Tie Spacing (Prototype)20" (508 mm)Tie spacing center of tie to center of tie.
Tie Size (Model)L - 1.59" (40 mm)
W - 0.14" (4 mm)
H - 0.0625" (2 mm)
The actual size of the tie.
Tie Size (Prototype)L - 8.5' (2.6 m)
W - 9"(229 mm)
H - 7" (178 mm)
The original tie size that the model was based on.
Secondary Frog Angle15.7°The second frog angle for any switch that has two frogs.
Track Gauge0.89" (23 mm)The distance between the stock rails.
Substitution Radius61" (1549 mm)The approximate radius that the diverging route of a turnout can be fit into. This calculation was made using the shortest possible turnout length measured from the edges of the PC board ties, not the wood ties.
SizeL - 17" (432 mm)
W - 6" (152 mm)
H - 0.25" (6 mm)
The physical size of the product
Weight1.7 lbs (0.771 kg)
Material6061 Aluminum
Building Turnouts Using Fast Tracks Assembly Fixtures

This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.

Building A 3-Way Switch With A Fast Tracks Assembly Fixture

This Builders Guide applies to three-way lapped turnouts in all scales and gauges.

Building A Stub Switch Using A Fast Tracks Assembly Fixture.

Do you already own a Fast Tracks Assembly Fixture? Then you can use the same fixture and tools you have now to build a stub turnout with QuickSticks and PC Board ties.

Using The PointForm Tool To Build Frog & Switch Points

We offer a number of different types of PointForm tools. This document provides general instructions on how to use a PointForm tool. These instructions apply to all PointForm tools.

Filing The Stock Rail With The Fast Tracks StockAid Filing Tool

Using the StockAid tool to remove the base of the stock rail in a turnout. These instructions apply to all sizes of StockAid tools.

Completing Switches Using Fast Tracks QuickSticks

This Builders Guide details how to complete building your switch using QuickSticks laser-cut wood ties.

Building A Turnout Switch Using Fast Tracks Tools

Step-by-step videos demonstrate how to build a complete switch using a Fast Tracks assembly fixture, PointForm, StockAid, and other tools.

Using The Fast Tracks PointForm Tool To Build Switchpoints

The PointForm tool is not only used to file Frog points. It can also be used to file perfect switch points as well. Here is how it works.

Using The Multi-Brush Solder Paste Applicator For Soldering Trackwork

The Multi-Brush makes applying just he right amount of solder flux quick and easy. You will also find it a handy brush to have around for general model construction as well.

Using The 35W Weller Soldering Iron For Model Railroad Trackwork

Using the right soldering iron to solder trackwork is critical to success. We recommend the 35 watt Weller pencil type soldering iron with the ST7 conical shaped soldering tip. Watch along as we demonstrate how to get the most from this soldering equipment.

Solder Overview

Detail about the solder supplied by Fast Tracks for building all types of model trackwork.

Cutting Rail Gaps

We thought you might like this short video we produced showing the process of cutting rail gaps to isolate the frog in a Fast Tracks turnout electrically. This step is critical and can not be skipped. Otherwise, the track will have a dead short and can not be powered.

Painting Trackwork Slideshow

We are often asked if we have made a video on painting trackwork, and to date, we have not. Back in 2009, we produced a slideshow for MRH Magazine on how we finish turnouts, but it is no longer available from them, so we reproduced it and uploaded it here.

Using The Fast Tracks PointForm Tool To Build Frogpoints

Building highly accurate frogpoints is made fast and simple with the Fast Tracks PointForm tool. Here is a detailed demonstration showing you how it works.

Using The StockAid Tool To File The Base Of The Stockrail

Video demonstration on using the StockAid tool to remove the base of the stockrail.

Fast Tracks Video Channel

Visit our growing collection of track building demonstration videos

Fast Tracks Knowledge Base

In addition to an extensive Q&A section, we also offer a full library of track building documents.


PREVIOUSLY VIEWED PRODUCTS