Your cart is currently empty!
Built When Ordered
Production Time: 5 days
The AF-N-G-6-ME40 will be automatically added to our production queue when it is ordered.
PRICE : $146.99
Build Gantlet switches and track using our Gantlet Track assembly fixture.
Gantlet (or Gauntlet) track is where two parallel tracks are interlaced, allowing them to be laid on a single track width roadbed.
This allows a railroad to use a single-track bridge or tunnel on a double-track mainline. A unique "Gantlet" turnout is used to achieve this, where the two lines cross using a standard frog but no switch points.
The same assembly fixture can be used to build both a gantlet turn out and straight gantlet track lengths. Like our straight and curved track fixture, unlimited lengths of Gantlet track can be constructed by simply advancing the track in the fixture as it is built.
Hand laying your own N #6 Gantlets is not as hard as you might think! Tools and technology designed and manufactured by Fast Tracks now make it possible for you to build your high-quality, NMRA compliant gantlet trackwork.
Build gantlets that not only look great but will eliminate track related derailments and frustration.
Fast Tracks assembly fixtures will help you build high-quality hand-laid track that:
- Is Highly Accurate - Build gantlets that stay in perfect gauge - permanently
- Performs Perfectly - Eliminates track related derailments
- Is Economical - Build hundreds of gantlets with one fixture
- Is Easy To Build - No special skills are needed
- Can Be Built Quickly - Build a gantlet in less than an hour!
- Looks Great! - Get results that rival even the most experienced modelers
- Lets You Work in Comfort - Build trackwork at your workbench
- Is NMRA Compliant - Will work with any NMRA compliant equipment
If you order a Fast Tracks assembly fixture, we highly recommend that you consider purchasing a matching PointForm filing tool. This will make the construction of the frog points much easier.
We do not have pre-cut CopperHead PC Board Crossties available for the Gantlet track. For PC board ties, use our turnout size instead. Click on the Supplies Tab above to add additional items needed to build gauntlet track to your order. Try our Supplies Calculator to determine the consumable items you will need for your trackwork project.
Below is a cross-reference chart showing which rail other than Micro Engineering is compatible with our fixtures.
| Fixture Cut For | Rail Size | Compatible With |
|---|---|---|
| ME Code 55 | Code 55 | Atlas Code 80 |
| ME Code 55 | Code 55 | Atlas Code 55 |
| ME Code 55 | Code 55 | Peco Code 80 |
| ME Code 70 | Code 70 | ME Code 83 |
| ME Code 70 | Code 70 | Peco Code 83 (IL-115) |
| ME Code 70 | Code 70 | Peco 75 |
| ME Code 70 | Code 70 | Pilz Code 83 |
| ME Code 70 | Code 70 | Tilig 83 |
| ME Code 83 | Code 83 | ME Code 70 |
| ME Code 83 | Code 83 | Peco Code 83 (IL-115) |
| ME Code 83 | Code 83 | Peco 75 |
| ME Code 83 | Code 83 | Pilz Code 83 |
| ME Code 83 | Code 83 | Tilig 83 |
| ME Code 100 | Code 100 | Walthers Code 83 |
| ME Code 100 | Code 100 | Roco Line 83 |
| ME Code 100 | Code 100 | Atlas Code 83 |
| ME Code 100 | Code 100 | Atlas Code 100 |
| ME Code 125 | Code 100 | C & L 125 |
| ME Code 148 | Code 100 | Right-O-Way 148 |
Track Building Supplies
You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!
In addition to an assembly fixture, you also need to order additional supplies.
Enter the number of switches you want to build in the top box and then click the Calculate Quantities button to determine how many products you should order.
You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!
Description
REC
Options we recommend you purchase if you don’t already have them.
Quantity
Option Price
Option Total
You added track building supplies and tools to the cart, but not the assembly fixture needed to build trackwork.
Do you want to add a N Scale, #6 Gantlet Track Assembly Fixture for Micro Engineering 40 Rail to your order?
No Thanks
Be the first to review “N Scale, #6 Gantlet Track Assembly Fixture for Micro Engineering 40 Rail”
You must be logged in to post a review.
| PARAMETER | VALUE | DETAILS |
|---|---|---|
| Default Turnout Length | 6.4" (163 mm) | This is the length of the turnout on the QuickSticks. Measured from end tie to end tie. |
| Minimum Turnout Length | 5" (127 mm) | This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie. |
| Diverging Route Angle | 9.46 (Decimal) 9°/27'/36"(D/M/S) 1:6 (Ratio) | Decimal = Frog angle in decimal degrees D/M/S = Deg/Min/Sec Ratio = Frog angle expressed as a ratio |
| Diverging Route Radius | 27" (686 mm) | The minimum radius in a straight turnout. |
| Tie Spacing (Prototype) | 20" (508 mm) | Tie spacing center of tie to center of tie. |
| Tie Size (Model) | L - 0.782" (20 mm) W - 0.06" (2 mm) H - 0.04" (1 mm) | The actual size of the tie. |
| Tie Size (Prototype) | L - 10' (3 m) W - 9"(229 mm) H - 7" (178 mm) | The original tie size that the model was based on. |
| Track Gauge | 0.36" (9 mm) | The distance between the stock rails. |
| Size | L - 6" (152 mm) W - 3" (76 mm) H - 0.25" (6 mm) | The physical size of the product |
| Weight | 0.6 lbs (0.272 kg) | |
| Material | 6061 Aluminum |
Building Turnouts Using Fast Tracks Assembly Fixtures
This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.
Using The PointForm Tool To Build Frog & Switch Points
We offer a number of different types of PointForm tools. This document provides general instructions on how to use a PointForm tool. These instructions apply to all PointForm tools.
Filing The Stock Rail With The Fast Tracks StockAid Filing Tool
Using the StockAid tool to remove the base of the stock rail in a turnout. These instructions apply to all sizes of StockAid tools.
Completing Switches Using Fast Tracks QuickSticks
This Builders Guide details how to complete building your switch using QuickSticks laser-cut wood ties.
Building A Turnout Switch Using Fast Tracks Tools
Step-by-step videos demonstrate how to build a complete switch using a Fast Tracks assembly fixture, PointForm, StockAid, and other tools.
Using The TieBreaker PC Board Tie Cutting Tool
Cutting each PC Board tie to the length you need for a turnout can be tedious and drawn-out. Here Tim demonstrates how the Fast Tracks TieBreaker tool speeds up the process, reducing the construction time for a turnout by as much as 30%!
Using The Multi-Brush Solder Paste Applicator For Soldering Trackwork
The Multi-Brush makes applying just he right amount of solder flux quick and easy. You will also find it a handy brush to have around for general model construction as well.
Using The 35W Weller Soldering Iron For Model Railroad Trackwork
Using the right soldering iron to solder trackwork is critical to success. We recommend the 35 watt Weller pencil type soldering iron with the ST7 conical shaped soldering tip. Watch along as we demonstrate how to get the most from this soldering equipment.
Solder Overview
Detail about the solder supplied by Fast Tracks for building all types of model trackwork.
Cutting Rail Gaps
We thought you might like this short video we produced showing the process of cutting rail gaps to isolate the frog in a Fast Tracks turnout electrically. This step is critical and can not be skipped. Otherwise, the track will have a dead short and can not be powered.
Painting Trackwork Slideshow
We are often asked if we have made a video on painting trackwork, and to date, we have not. Back in 2009, we produced a slideshow for MRH Magazine on how we finish turnouts, but it is no longer available from them, so we reproduced it and uploaded it here.
Making a Over Center Spring for Manual Turnout Control
A step-by-step instructional video on how to add a simple center over spring to a Fast Tracks (or other) turnout. With this simple spring, you can manually switch a turnout without needing any switch machine!
Using The Fast Tracks PointForm Tool To Build Frogpoints
Building highly accurate frogpoints is made fast and simple with the Fast Tracks PointForm tool. Here is a detailed demonstration showing you how it works.
Fast Tracks Video Channel
Visit our growing collection of track building demonstration videos
Fast Tracks Knowledge Base
In addition to an extensive Q&A section, we also offer a full library of track building documents.
Reviews
There are no reviews yet.