Due to a labour interruption effecting Canada Post, Postal shipping options are temporarily unavailable. UPS options are still avilable.
Browse Catalog
Due to a labour interruption effecting Canada Post, Postal shipping options are temporarily unavailable. UPS options are still avilable.

HO Scale, #5 Wye Assembly Fixture for Micro Engineering 55 Rail

AF-HO-Y-5-ME55
Slide

Made When Ordered

Production Time: 5 days

The AF-HO-Y-5-ME55 will be automatically added to our production queue when it is ordered.

PRICE : $117.59

Hand laying your own HO, #5 wyes is not as hard as you might think! Tools and technology designed and manufactured by Fast Tracks now make it possible for you to build your own high-quality, NMRA compliant wyes.

Don't forget to order supplies!

With this HO #5 wye assembly fixture, you can build an unlimited supply of wye switches when you need them, at the comfort of your workbench, in about an hour. Fast Tracks, the turnout assembly fixture system developer, has been producing its line of extremely precise tools since 2003. We've worked out all the details to make building trackwork as easy as possible, so now any modeler can produce the most accurate, best-looking, and smoothest operating trackwork available.

Build wyes that not only look great but will eliminate track related derailments and frustration.

Fast Tracks assembly fixtures will help you build high-quality hand-laid track that:

  • Is Highly Accurate - Build wyes that stay in perfect gauge - permanently
  • Performs Perfectly - Eliminates track related derailments
  • Is Economical - Build hundreds of wyes with one fixture
  • Is Easy To Build - No special skills are needed
  • Can Be Built Quickly - Build a wye in less than an hour!
  • Looks Great! - Get results that rival even the most experienced modelers
  • Lets You Work in Comfort - Build trackwork at your workbench
  • Is NMRA Compliant - Will work with any NMRA compliant equipment

If you order a Fast Tracks assembly fixture, we highly recommend that you consider purchasing matching PointForm and StockAid filing tools. This will make the construction of the switch and frog points much easier.

Our #5 wyes use a standard #5 frog angle, choose that size of PointForm tool to use with this fixture.

In addition to code 55 rail, you will also need to purchase matching 0.0625" (1.6mm), (7 scale inches) thick, HO CopperHead PC board turnout ties manufactured by Fast Tracks.

To finish off your trackwork, add our matching QuickSticks to your order. These laser-cut wood ties will make finishing turnouts a snap, glue the complete set of pre-cut ties to the turnout, and it's done! We also offer traditional single piece wood turnout ties as well.

Click on the Supplies Tab above to add additional items needed to build Wyes to your order. Try our Supplies Calculator to determine the consumable items you will need for your trackwork project.

Below is a cross-reference chart showing which rail other than Micro Engineering is compatible with our fixtures.

Fixture Cut ForRail SizeCompatible With
ME Code 55Code 55Atlas Code 80
ME Code 55Code 55Atlas Code 55
ME Code 55Code 55Peco Code 80
ME Code 70Code 70ME Code 83
ME Code 70Code 70Peco Code 83 (IL-115)
ME Code 70Code 70Peco 75
ME Code 70Code 70Pilz Code 83
ME Code 70Code 70Tilig 83
ME Code 83Code 83ME Code 70
ME Code 83Code 83Peco Code 83 (IL-115)
ME Code 83Code 83Peco 75
ME Code 83Code 83Pilz Code 83
ME Code 83Code 83Tilig 83
ME Code 100Code 100Walthers Code 83
ME Code 100Code 100Roco “Line” 83
ME Code 100Code 100Atlas Code 83
ME Code 100Code 100Atlas Code 100
ME Code 125Code 100C & L 125
ME Code 148Code 100Right-O-Way 148

Track Building Supplies

You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!

In addition to an assembly fixture, you also need to order additional supplies.

Enter the number of switches you want to build in the top box and then click the Calculate Quantities button to determine how many products you should order.

Enter the number of switches you want to build in the top box and then click the Calculate Quantities button to determine how many products you should order.

You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!

$0.00
Selected Options Total
$0.00
Selected Options Total
$0.00

You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!

Description
REC
Options we recommend you purchase if you don’t already have them.
Quantity
Option Price
Option Total
4815
1
1.0000
i
Recommended
$7.49/ea
$0.00/total
3213
1
1.0000
i
$7.49/ea
$0.00/total
3168
4
4.0000
i
Recommended
$1.15/ea
$0.00/total
3193
1
0.3704
i
Recommended
$4.99/ea
$0.00/total
6296
1
0.0680
i
$25.49/ea
$0.00/total
5202
0
0.0000
i
Recommended
$63.95/ea
$0.00/total
3197
0
0.0000
i
Recommended
$79.95/ea
$0.00/total
3161
0
0.0000
i
Recommended
$5.45/ea
$0.00/total
3162
0
0.0000
i
Recommended
$7.45/ea
$0.00/total
3177
0
0.0000
i
$12.50/ea
$0.00/total
4653
0
0.0000
i
$70.75/ea
$0.00/total
3184
0
0.0000
i
$111.20/ea
$0.00/total
3189
0
0.0000
i
Recommended
$0.00/ea
$0.00/total

Reviews

There are no reviews yet.

Be the first to review “HO Scale, #5 Wye Assembly Fixture for Micro Engineering 55 Rail”
PARAMETERVALUEDETAILS
Default Turnout Length9.6" (244 mm)This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length7" (178 mm)This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle11.31 (Decimal)
11°/18'/36"(D/M/S)
1:5 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
Diverging Route Radius46" (1168 mm)The minimum radius in a straight turnout.
Tie Spacing (Prototype)20" (508 mm)Tie spacing center of tie to center of tie.
Tie Size (Model)L - 1.17" (30 mm)
W - 0.1" (3 mm)
H - 0.0625" (2 mm)
The actual size of the tie.
Tie Size (Prototype)L - 8.5' (2.6 m)
W - 9"(229 mm)
H - 7" (178 mm)
The original tie size that the model was based on.
Track Gauge0.66" (17 mm)The distance between the stock rails.
Substitution Radius55.5" (1410 mm)The approximate radius that the diverging route of a turnout can be fit into. This calculation was made using the shortest possible turnout length measured from the edges of the PC board ties, not the wood ties.
SizeL - 8.5" (216 mm)
W - 3" (76 mm)
H - 0.25" (6 mm)
The physical size of the product
Weight0.613 lbs (0.278 kg)
Material6061 Aluminum
Building Turnouts Using Fast Tracks Assembly Fixtures

This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.

Building A Stub Switch Using A Fast Tracks Assembly Fixture.

Do you already own a Fast Tracks Assembly Fixture? Then you can use the same fixture and tools you have now to build a stub turnout with QuickSticks and PC Board ties.

Using The PointForm Tool To Build Frog & Switch Points

We offer a number of different types of PointForm tools. This document provides general instructions on how to use a PointForm tool. These instructions apply to all PointForm tools.

Filing The Stock Rail With The Fast Tracks StockAid Filing Tool

Using the StockAid tool to remove the base of the stock rail in a turnout. These instructions apply to all sizes of StockAid tools.

Completing Switches Using Fast Tracks QuickSticks

This Builders Guide details how to complete building your switch using QuickSticks laser-cut wood ties.

Building A Turnout Switch Using Fast Tracks Tools

Step-by-step videos demonstrate how to build a complete switch using a Fast Tracks assembly fixture, PointForm, StockAid, and other tools.

Using The TieBreaker PC Board Tie Cutting Tool

Cutting each PC Board tie to the length you need for a turnout can be tedious and drawn-out. Here Tim demonstrates how the Fast Tracks TieBreaker tool speeds up the process, reducing the construction time for a turnout by as much as 30%!

Using The Multi-Brush Solder Paste Applicator For Soldering Trackwork

The Multi-Brush makes applying just he right amount of solder flux quick and easy. You will also find it a handy brush to have around for general model construction as well.

Using The 35W Weller Soldering Iron For Model Railroad Trackwork

Using the right soldering iron to solder trackwork is critical to success. We recommend the 35 watt Weller pencil type soldering iron with the ST7 conical shaped soldering tip. Watch along as we demonstrate how to get the most from this soldering equipment.

Solder Overview

Detail about the solder supplied by Fast Tracks for building all types of model trackwork.

Cutting Rail Gaps

We thought you might like this short video we produced showing the process of cutting rail gaps to isolate the frog in a Fast Tracks turnout electrically. This step is critical and can not be skipped. Otherwise, the track will have a dead short and can not be powered.

Painting Trackwork Slideshow

We are often asked if we have made a video on painting trackwork, and to date, we have not. Back in 2009, we produced a slideshow for MRH Magazine on how we finish turnouts, but it is no longer available from them, so we reproduced it and uploaded it here.

Making a Over Center Spring for Manual Turnout Control

A step-by-step instructional video on how to add a simple center over spring to a Fast Tracks (or other) turnout. With this simple spring, you can manually switch a turnout without needing any switch machine!

Using The Fast Tracks PointForm Tool To Build Frogpoints

Building highly accurate frogpoints is made fast and simple with the Fast Tracks PointForm tool. Here is a detailed demonstration showing you how it works.

Fast Tracks Video Channel

Visit our growing collection of track building demonstration videos

Fast Tracks Knowledge Base

In addition to an extensive Q&A section, we also offer a full library of track building documents.


PREVIOUSLY VIEWED PRODUCTS