As of July 1, 2024, the 1-888 phone service in no longer available. Use the Contact Us Button above for support.
Browse Catalog
As of July 1, 2024, the 1-888 phone service in no longer available. Use the Contact Us Button above for support.

HO Scale, #5 Slip Switch Assembly Fixture for Micro Engineering 100 Rail

AF-HO-S-5-ME100
Slide

Built When Ordered

Production Time: 5 days

The AF-HO-S-5-ME100 will be automatically added to our production queue when it is ordered.

PRICE : $146.99

Save space and add an impressive showpiece to your layout with a Fast Tracks Double Slip Switch built in our assembly fixture.

Don't forget to order supplies!

One of the most fascinating pieces of trackwork a layout can have is a double slip switch. Typically used in the throat of passenger terminals, they can also be found just about anywhere on a railroad. In addition to looking great, they are also a major space saver when used properly. A double slip switch is two opposing direction turnouts overlaid onto each other. So a double slip switch can save the space of one complete turnout if you have a situation where two turnouts are laid opposing each other on the same line. Fast Tracks assembly fixtures will help you build high-quality hand laid track that:

  • Is Highly Accurate - Build slips that stay in perfect gauge - permanently
  • Performs Perfectly - Eliminates track related derailments
  • Is Economical - Build hundreds of slip switches with one fixture
  • Can Be Built Quickly - Build a slip in a few hours!
  • Looks Great! - Get results that rival even the most experienced modelers
  • Lets You Work in Comfort - Build trackwork at your workbench
  • Is NMRA Compliant - Will work with any NMRA compliant equipment

Craftsman Series ToolsThis product is part of our Craftsman Series of tools designed for modelers who want to go that 'extra mile' to produce outstanding trackwork. It would help if you were prepared to spend extra time and effort learning how to use this product. Click here to learn more about our Craftsman Series of tools. You can build double and single slip switches using a Fast Tracks Double Slip Switch assembly fixture. We only have matching QuickSticks for Double Slip Switches, and we recommend adding some to your order. Single Slip Switches can be completed using individual wood ties, also available from Fast Tracks. If you order a Fast Tracks assembly fixture, we highly recommend that you consider purchasing matching PointForm and StockAid filing tools. This will make the construction of the switch and frog points much easier. Our #4, #5, and #6 slip switches use a solid frog in the centre frogs. That means there are no moving points in the middle of the switch. #8 slip switches have a much lower frog angle and must be built with moveable point frogs to be reliable. This adds to the time it takes to make this switch, as there are 12 moving points in the switch.

Click on the Supplies Tab above to add additional items needed to build slip switches to your order. Try our Supplies Calculator to determine the consumable items you need for your trackwork project.

Below is a cross-reference chart showing which rail other than Micro Engineering is compatible with our fixtures.

Fixture Cut ForRail SizeCompatible With
ME Code 55Code 55Atlas Code 80
ME Code 55Code 55Atlas Code 55
ME Code 55Code 55Peco Code 80
ME Code 70Code 70ME Code 83
ME Code 70Code 70Peco Code 83 (IL-115)
ME Code 70Code 70Peco 75
ME Code 70Code 70Pilz Code 83
ME Code 70Code 70Tilig 83
ME Code 83Code 83ME Code 70
ME Code 83Code 83Peco Code 83 (IL-115)
ME Code 83Code 83Peco 75
ME Code 83Code 83Pilz Code 83
ME Code 83Code 83Tilig 83
ME Code 100Code 100Walthers Code 83
ME Code 100Code 100Roco “Line” 83
ME Code 100Code 100Atlas Code 83
ME Code 100Code 100Atlas Code 100
ME Code 125Code 100C & L 125
ME Code 148Code 100Right-O-Way 148

double slipover
Slip Switches at Toronto's Union Station

Track Building Supplies

You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!

In addition to an assembly fixture, you also need to order additional supplies.

Enter the number of switches you want to build in the top box and then click the Calculate Quantities button to determine how many products you should order.

Enter the number of switches you want to build in the top box and then click the Calculate Quantities button to determine how many products you should order.

You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!

$0.00
Selected Options Total
$0.00
Selected Options Total
$0.00

You have added supplies to the cart, but not the assembly fixture needed to build trackwork. Don’t forget to add the fixture to your order!

Description
REC
Options we recommend you purchase if you don’t already have them.
Quantity
Option Price
Option Total
4772
1
1.0000
i
Recommended
$9.49/ea
$0.00/total
3199
8
8.0000
i
Recommended
$1.60/ea
$0.00/total
3193
1
0.7037
i
Recommended
$4.99/ea
$0.00/total
6296
1
0.0800
i
$25.49/ea
$0.00/total
5200
0
0.0000
i
Recommended
$66.95/ea
$0.00/total
3205
0
0.0000
i
Recommended
$79.95/ea
$0.00/total
3161
0
0.0000
i
Recommended
$5.45/ea
$0.00/total
3162
0
0.0000
i
Recommended
$7.45/ea
$0.00/total
3177
0
0.0000
i
$12.50/ea
$0.00/total
4653
0
0.0000
i
$70.75/ea
$0.00/total
3184
0
0.0000
i
$111.20/ea
$0.00/total
3189
0
0.0000
i
Recommended
$0.00/ea
$0.00/total

1 review for HO Scale, #5 Slip Switch Assembly Fixture for Micro Engineering 100 Rail

  1. 5 out of 5

    Frank Martz (verified owner)

    This is the first Switch Fixture I have used (I have other fixtures) and had very good results. but when doing a final clearance check i find one wing rail on each end to narrow but this is easily adjusted.The Builders Guide/Instructions witch is for a #6 state(applies to all sizes)I found this not totally true. Although very helpful I think there should be sub steps for each sizes. Numbers 4-5-6 Fixtures have different number and spacing of ties.

Add a review
PARAMETERVALUEDETAILS
Default Turnout Length13.1" (333 mm)This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length8.8" (224 mm)This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle11.31 (Decimal)
11°/18'/36"(D/M/S)
1:5 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
Diverging Route Radius33" (838 mm)The minimum radius in a straight turnout.
Tie Spacing (Prototype)20" (508 mm)Tie spacing center of tie to center of tie.
Tie Size (Model)L - 1.17" (30 mm)
W - 0.1" (3 mm)
H - 0.0625" (2 mm)
The actual size of the tie.
Tie Size (Prototype)L - 8.5' (2.6 m)
W - 9"(229 mm)
H - 7" (178 mm)
The original tie size that the model was based on.
Track Gauge0.66" (17 mm)The distance between the stock rails.
Substitution Radius34" (864 mm)The approximate radius that the diverging route of a turnout can be fit into. This calculation was made using the shortest possible turnout length measured from the edges of the PC board ties, not the wood ties.
SizeL - 11.5" (292 mm)
W - 3" (76 mm)
H - 0.25" (6 mm)
The physical size of the product
Weight1.4 lbs (0.635 kg)
Material6061 Aluminum
Building Turnouts Using Fast Tracks Assembly Fixtures

This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.

Building A Double Slip Switch With A Fast Tracks Assembly Fixture

These instructions apply to all scales and sizes of fixed frog Double Slips Switches.

Using The PointForm Tool To Build Frog & Switch Points

We offer a number of different types of PointForm tools. This document provides general instructions on how to use a PointForm tool. These instructions apply to all PointForm tools.

Filing The Stock Rail With The Fast Tracks StockAid Filing Tool

Using the StockAid tool to remove the base of the stock rail in a turnout. These instructions apply to all sizes of StockAid tools.

Completing Switches Using Fast Tracks QuickSticks

This Builders Guide details how to complete building your switch using QuickSticks laser-cut wood ties.

Using The Fast Tracks PointForm Tool To Build Switchpoints

The PointForm tool is not only used to file Frog points. It can also be used to file perfect switch points as well. Here is how it works.

Using The Multi-Brush Solder Paste Applicator For Soldering Trackwork

The Multi-Brush makes applying just he right amount of solder flux quick and easy. You will also find it a handy brush to have around for general model construction as well.

Using The 35W Weller Soldering Iron For Model Railroad Trackwork

Using the right soldering iron to solder trackwork is critical to success. We recommend the 35 watt Weller pencil type soldering iron with the ST7 conical shaped soldering tip. Watch along as we demonstrate how to get the most from this soldering equipment.

Making a Over Center Spring for Manual Turnout Control

A step-by-step instructional video on how to add a simple center over spring to a Fast Tracks (or other) turnout. With this simple spring, you can manually switch a turnout without needing any switch machine!

Using The Fast Tracks PointForm Tool To Build Frogpoints

Building highly accurate frogpoints is made fast and simple with the Fast Tracks PointForm tool. Here is a detailed demonstration showing you how it works.

Using The StockAid Tool To File The Base Of The Stockrail

Video demonstration on using the StockAid tool to remove the base of the stockrail.

Fast Tracks Video Channel

Visit our growing collection of track building demonstration videos

Fast Tracks Knowledge Base

In addition to an extensive Q&A section, we also offer a full library of track building documents.


PREVIOUSLY VIEWED PRODUCTS