Your cart is currently empty!
Built When Ordered
Production Time: 2 to 3 days
The LT-ON30-B-M-10-D will be automatically added to our production queue when it is ordered.
PRICE : $3.69
These On30 drilled crosstie QuickSticks strips for flexible trackwork provide the modeler with a fast and efficient method for finishing curved lengths of soldered Flexible track built with a Fast Tracks assembly fixture.
Part of the Fast Tracks Infinite™ Track System, each laser-cut strip is a lattice of wood ties glued directly to the roadbed and designed to accommodate the soldered PC Board ties.
Strips can be linked together using a TieClip connector to form strips of any length. Strips can also be connected to any other Fast Tracks QuickSticks product (used to construct Turnouts, Wyes, etc.) and can be shortened if necessary.
The skeleton trackwork (the rail and PC Board Ties) built in a Fast Tracks assembly fixture is simply set on top of the QuickSticks Strips and spiked or glued into place. Empty areas are strategically located along the strip to accommodate the PC Board Ties used for building trackwork in assembly fixture.
QuickSticks Flexible Crosstie Strips offers incredible convenience and accuracy when used with Fast Tracks fixture built trackwork.
- Makes track completion fast and easy
- Can be used to finish straight or curved sections of track
- Can be bent to fit any curve
- Strips can be connected to form strips of any length
- Strips can be connected to other Fast Tracks QuickSticks products
- Includes etched guidelines to verify rail location
- Matches the tie height of most commercial track products
- Are NMRA compliant
QuickSticks Flexible Crosstie Strips are cut from pliable Baltic Birch plywood custom sawn specifically for Fast Tracks. The ties are 0.15” (3.8mm) 7 scale inches wide, 1.5” (38.1mm) 6 scale feet long and 0.1” (2.5mm), 5 scale inches thick, and will match commercially available wood ties and flextrack.
Each strip includes a TieClip connector for connecting the strip to another crosstie strip. You can order additional TieClips here.
The QuickSticks on this page are the drilled version. We offer Quicksticks with either drilled or non-drilled wood ties. The version you choose is a matter of personal preference. The non-drilled version has trackwork fastened to it with Pliobond adhesive. Plionbond will provide a solid bond for a lifetime as its bond increases over time and is very reliable. Spiking onto our drilled QuickSticks will provide a mechanical bond that some modelers prefer, but requires a bit more time to install. Not all ties are pre-drilled, only ties at key locations to allow the turnout to be fastened in place.
|Tie Spacing (Prototype)||21" (533 mm)||Tie spacing center of tie to center of tie.|
|Tie Size (Model)||L - 1.5" (38 mm)|
W - 0.15" (4 mm)
H - 0.1" (3 mm)
|The actual size of the tie.|
|Tie Size (Prototype)||L - 6' (1.8 m)|
W - 7"(178 mm)
H - 5" (127 mm)
|The original tie size that the model was based on.|
|Weight||0.03 lbs (0.014 kg)|
|Material||3 Ply Baltic Birch|
Building Turnouts Using Fast Tracks Assembly Fixtures
This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.
Completing Switches Using Fast Tracks QuickSticks
This Builders Guide details how to complete building your switch using QuickSticks laser-cut wood ties.
Finishing Straight/Curved Track With QuickSticks
Watch as we demonstrate how to use our QuickSticks laser cut ties to finish straight and curved trackwork built in a Fast Tracks fixture.
Fast Tracks Video Channel
Visit our growing collection of track building demonstration videos
Fast Tracks Knowledge Base
In addition to an extensive Q&A section, we also offer a full library of track building documents.
Items you may want to include in your order
227 in stock
9 in stock
33 in stock
0 in stock